| |
 |
| Our Product Family |
|
|
|
|
DLX |
|
Product Family DATA LOGGER
The DLX has been developed as a powerful tool for local registration and evaluation of meter pulses. These can
originate from energy meters, flow meters etc. The computed values are stored internally and can be transmitted to a
remote central station via different interfaces and communication protocols. The data interface serves for local data
inquiry using appropriate PC software or for connecting an external modem. Using the modem interface it is possible
to connect the internal modem to the telephone network in order to read out the billing values remotely by PC. The
service interface is used for setting the computation parameters by PC. Read-out is possible, too. For security
reasons, the contents of the internal data buffers and a part of the device parameters can be saved on a standard PCCard.
This card can be read by any PC equipped with a PC-Card drive.
The DLX are certified by German Physikalisch Technische Bundesanstalt (PTB-publication No. 3785).
The DATA FW4 und DLC 32 are modular built instruments for remote metering of electricity, gas, water, heat etc.
They process pulses originating from energy meters or flow sensors. These are converted into values for power or
energy, which are stored in a periodic buffer at the end of one measuring period, resulting in a load profile. The
energy values are accumulated in separate registers, depending on the momentary tariff. The devices are regulary
interrogated by a remote telecounting facility, which can then process the measured values further for billing
purposes.
The DATA FW4 und DLC 32 are certified by German Physikalisch Technische Bundesanstalt (PTB-publication No.
3649). |
|
|
DLC 32
DATAREG 32C |
|
|
|
DATA-FW04
DATAREG 48 |
|
|
|
| |
 |
 |
 |
|
|
Product Family Software
Programming software to program DATA LOGGER unites via the serial communication interface.
SIGLON for the deregulated market place, prozessing, display and export of meter data.
Some product names:
BMW, FZGR/DRA (ADAM), FMPS, DMFPARA, DLXPARA, SCTMWEXEL, UNIMODSET, SIGLON, BDR100. |
| |
|
|
|
|
|
Special Product Family
Control System for counter assembles
The control units using the 19" housing format serve to control transformer voltages, signal processing and in- and
output terminals, and in alarm switching system selection. There are a variety of customer specified models possible.
The above graphic is only one, of many, possibilities. There are various operating voltage ranges available, AC / DC
or DC / DC, with automatic voltage supply switching that can be used. Since our control units are produced to
customer specification, there are a large number of available possibilities. There are many possible combinations for
the individual components.
Switching Cabinet Installation
Complex tasks in the area of telecounting can only be solved through the use of a variety of equipment. One example
is the forwarding of counter output over a long distance through the use of signal isolation relays.
For this we offer the installation of this equipment in one switching cabinet complete with internal wiring of the
individual appliances and connecting the individual signals over terminal strips.
The individual requests of our customers will always be at the focus of our planning.
We naturally also offer the assembly of individual appliances in one switching cabinet with pivoting frames designed
for 19"-equipment from the Rittal company with a height of between 3 HU and 40 HU. Three HU corresponds to the
height of a DATA FW or an ÜWASYS.
The frame manufacturer can provide additional accessories (e.g. various fastening systems and, especially for larger
cabinets, air conditioning, cabinet lighting and much more).
For further information please request the catalogue, “Complete Solutions - installation of equipment in switching
cabinets“, available from us.
Production of low volume special devices. |
| |
|
|
|
|
|
