Baer Industrie-Elektronik GmbH
Home Information Products News Systems Contact Sitemap
 
 
EXTENDED
SEARCH
    

Metcom T

    
  Metcom T L+G  
    
Brief Description

Universal - Modems with 20 mA Input for Meterconnection and RS232 Interface over RJ45 plug and terminal.

Metcom T A
Metcom T I
Metcom T M
Metcom T E
Metcom T X


For pin assignment and device functions only the label in the connection terminal is relevant.




Interfaces
 

The interface to a end device is realised with a plug in module. At the moment those modules are available:

  • 20 mA (CS-Interface) active or passive
  • RS232 (RxD, TxD, CTS, RTS, GND, DTR, DCD/DSR)
  • RS485
  • M-Bus active (maximum of 10 devices) or passive

The communication can occour in many polupar transmission protocols, e. g. SCTM, LSV1, IEC1107, IEC870.

 



Brief description Metcom T A
 

Universal modem (analog/PSTN) with 20 mA input for meter connection and RS232 interface over RJ45 plug and terminal.
IEC 1107/SCTM/IEC60870, transparent with error correction
5 LED - control display
One password (for remote parametrization and password protection)
Tone or pulse dialling
Dialmode towards V.21 (300Bd) to V.32bis (14400Bd)
Supply voltage 85VAC to 265VAC / 60VDC to 375VDC
Baudrate parametrizable 300 to 57600 Baud (to meter)
Datatyp max. 11 Bit (8E1, 7E1, 8N1...)
Data Transmit Control to control datatransfers in online mode
Hayes Standard-AT instruction set
Simple installation: the housing fits on meter fixings.
Even if the environment is a little bit rough: with IP42 the Metcom T can withstand a lot.
EU- post accreditation


PDF File: Metcom T A Manual (File size 297K)
UniMod Set Parametriersoftware (File size 1.9M)
 



Brief description Metcom T I
 

Universal modem (Euro ISDN)  with 20 mA input for meter connection and RS232 interface over RJ45 plug and terminal.
IEC 1107/SCTM/IEC60870, transparent with error correction
5 LED - control display
One password (for remote parametrization)
Supply voltage 85VAC to 265VAC / 60VDC to 375VDC
Baudrate parametrizable 1200 to 230400 Baud (to meter)
MSN (Multiple Subscriber Number) possible
Subaddress possible (equivalent to: function password protection)
ISDN Access Control
Datatyp max. 11 Bit (8E1, 7E1, 8N1...)
Hayes Standard-AT instruction set
Simple installation: the housing fits on meter fixings.
Even if the environment is a little bit rough: with IP42 the Metcom T can withstand a lot.
EU- post accreditation


PDF File: UniMod Set Parameterization software (File size 1.9M)
 



Brief description Metcom T M
 

Universal modem Metcom T M (GSM-900/1800-MHz Dual-Band) with 20 mA input for meter connection and RS232 interface over RJ45 plug and terminal.

IEC 1107/SCTM/IEC60870, transparent/ non transparent with error correction
5 LED - control display
One password (for remote parametrization and password protection, optional)
Bit rate: 2400, 4800 and 9600Bd (depending on GSM-Network)
Supply voltage 85VAC to 265VAC / 60VDC to 375VDC
Baudrate parametrizable 300 to 57600 Baud (to meter)
Datatyp max. 11 Bit (8E1, 7E1, 8N1...)

Output rating 2 Watt (Class 4 )
Sensibility: -104dBm
3V SIM-Card interface
SMS function
Connection to telefone network (analog or ISDN) possible
Hayes Standard-AT instruction set
Simple installation: the housing fits on meter fixings.
Even if the environment is a little bit rough: with IP42 the Metcom T can withstand a lot.
EU- post accreditation

Without SIM - Card!


PDF File: Metcom T M Manual (File size 452K)
UniMod Set Parameterization software (File size 1.9M)
 



Brief description Metcom T E
 

Universal modem series for LAN (Local Area Network) (Ethernet Adapter) with 20 mA input for meter connection and RS232 interface over RJ45 plug and terminal.
5 LED - control display
One password (for remote parametrization and password protection)
Supply voltage 85VAC to 265VAC / 60VDC to 375VDC
Baudrate parametrizable 300 to 115200 Baud
Datatyp max. 11 Bit (8E1, 7E1, 8N1...)
Hayes Standard-AT instruction set
Data transmission via network 10 Mbit/s (IEEE802.3)
Network connector 10 Base-T
Protocols ARP, ICMP, TCP/IP, UPD/IP
Simple installation: the housing fits on meter fixings.
Even if the environment is a little bit rough: with IP42 the Metcom T can withstand a lot.


PDF File: Metcom T E Manual (File size 286K)
UniMod Set Parameterization software (File size 1.9M)
 



Brief description Metcom T X
 

The universal communication device Metcom T X is thought for scanning every kind of measured data, firstly for the remote meter area. It is realised as conversion box and is used to physicaly ajust  and galvanicaly separate two interfaces.

Sie ist wie folgt konfiguriert:
first interface RS232
second interface selectable: M-Bus (active), 20mA (active or passive), RS485

A Conversion Box with two selectable interfaces in the RSE Case you can find at the M-Bus products.


PDF File: Metcom T X Manual (File size 168K)
UniMod Set Parameterization software (File size 1.9M)
 



Housing outline drawing
 
Dimensions:     W = 171,6 mm
H = 117 mm (incl. connection terminal)
T = 66 mm
 



to SURVEY of modems

 


Relays
Modems
UniMod
   01/I
  01/ISDN
  ETHERNET
  GSM-4
  Radio
  UniModSet
  Antennas
  Metcom T
Data
Logger
Software
M-Bus/RS485
Special
Product
Family
Modules
Service
 

Top of Page

 Home    |    Information    |    Products    |    News    |    Service    |    Contact us    |    Sitemap

Copyright © Bär Industrie-Elektronik GmbH

Last Update 09.01.2012 at 17:33:42.