| |
 |
| Relays Series 7PA.. |
|
Technical
Partition 2
|
|
 |
|
The relay type7PAS02Wt has one
active S0 pulse input and two electronically wipe pulse outputs (fixed
pulse length: approx. 90ms).
|
| Input: |
1 × S0-Input |
| Output: |
2 × IAW wipe pulse
outputs, max. 265V. / 100mA,
pulse length: approx. 90ms, independent of the input pulses |
| Auxiliary Power- |
115V~ or 230V~ |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
04218 (115V)
04113 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
| Input: |
1 ×
S0-Input |
| Output: |
2 × wipe
pulse
output max. 265V@
/ 100mA
Pulse duration 2s |
| Transmission ratio: |
1:10 or 1:100 |
| Auxiliary power: |
115V~ oder 230V~ |
| Power consumtion: |
approx. 1,5VA |
| Display: |
pulse display via
2 LEDs (Input/Output) |
| Order-Number: |
11401 (115V)
11400 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
|
The relay type 7PAS03W has one
active S0 pulse input and three electronically wipe pulse outputs.
|
| Input: |
1 × S0-Input |
| Output: |
3 × IAW wipe pulse
outputs, each max. 265V@
/
100mA |
| Auxiliary Power: |
115V~ or 230V~ |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
04119 (115V)
01103 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
| 7PASU3Wm |
|
Monitoring of three-phase power grids |
 |
Das Relais 7PASU3Wm dient in The
7PASU3Wm relay serves in the monitoring of three-phase power grids. It
has one maker contact output and one breaker contact output, and is
installed in a delta connection (without a neutral wire). It can, then,
warn when there is a failure in one, or more, phases due to contact
error.
|
| Delta Voltage: |
max. 150Veff
/ 45..65Hz |
| Reaction Voltage: |
approx. 82Veff |
| Drop-out Voltage: |
approx. 68Veff |
| Output: |
1 × maker contact,
1 × breaker contact 250V/1A
pick-up occurs if there is a failure in one, or more, of the phases |
| Order-Number: |
06064 |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
| 7PATG1 |
|
Clock-Pulse Generator Relay (CPG) |
  |
The 7PATG1 clock-pulse generator
relay produces second pulses from the 50Hz AC grid.
They can serve in measuring period control, tariff signal length, and a
number of other time-dependent tasks.
|
| Input: |
none |
| Output: |
1 × IAW wipe pulse
output, max. 265V@
/ 100mA |
| Pulse
frequency: |
1Hz,
pulse length: 360ms,
pulse intermission: 640ms |
| Auxiliary Power: |
115V~ or 230V~
(terminal connections), 50Hz |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
06972 |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
|
The relay type 7PAW1D has one
electronically wipe pulse input and one electronically bipolar current
output.
|
| Input: |
1 × IEW wipe pulse
input 24..265V@ |
| Output: |
1 × IAD bipolar
current output approx. 24V / 30mA |
| Auxiliary Power: |
115V or 230V~ |
| Inputvoltage: |
24V - 230V@ |
| Power Consumption: |
approx 3VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
04090 (115V)
04092 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
| Input: |
1 × IEW wipe pulse
24..265V@ |
| Output: |
1 × IAW wipe pulse,
230V@
/100mA |
| Auxiliary Power: |
115V~ or 230V~ |
| Inputvoltage: |
24V..230V |
| Power Consumption: |
approx 1,5VA |
| Display: |
Pulse display using 1 LED |
| Order-Number: |
03590 (115V)
09893 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
|
The relay type 7PAW2W has one
electronically wipe pulse input and two electronically wipe pulse
outputs.
|
| Input: |
1 × IEW wipe pulse
input 24..265V@ |
| Output: |
2 × IAW wipe pulse
output 230V@
/100mA |
| Auxiliary Power: |
115V~ or 230V~ |
| Inputvoltage: |
24V..230V |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
04289 (115V)
04290 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
|
The relay type 7PAW2Wt has one
electronically wipe pulse input and two electronically wipe pulse
outputs (fixed pulse length: approx. 90ms).
|
| Input: |
1 × IEW wipe pulse
input 24..265V@ |
| Output: |
2 × IAW wipe pulse
output max. 265V@
/ 100mA,
pulse length: approx. 90ms, independent of the input pulses |
| Auxiliary Power: |
115V~ or 230V~ |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
03725 (115V)
08396 (230V) |
| |
|
to
SURVEY of Relays to the 7PA.. selection
|
 |
|
The relay type 7PAW3W has one
electronically wipe pulse input and three electronically wipe pulse
outputs.
|
| Input: |
1 × IEW wipe pulse
input 24..265V@ |
| Output: |
3 × IAW wipe pulse
output max. 265V@
/ 100mA |
| Auxiliary Power: |
115V~ or 230V~ |
| Power Consumption: |
approx. 1,5VA |
| Display: |
pulse display
using 1 LED |
| Order-Number: |
04746 (115V)
04846 (230V) |
|
|
